Tag: weld

Fabrication Life fans, we need your opinion! We posted the photo below yesterday, and we all were obsessed with it. Everything about it screamed BAD ASS! Spending the day with the materials to make this happen is even worse because we got that itch. You all know the itch… it’s a curse!

Continue reading →

As you know Solidworks is one very powerful program. Inside, you are not only the creator, but you control all elements. You can do anything, move anywhere, bold any surface. But as much as Solidworks is a great tool with massive creating potential, it also can be overly confusing at times, too. How many times have you gotten stuck or opened the app and have been like, this is taking too long.

Continue reading →

FabricationLife brings you another strong installment of Tig’d Up Tuesday! This Tuesday, the submissions were plentiful. Keep the submissions coming. Some days we will post more than others, but keep submitting. We may use yours on a future installment of Tig’d Up!

Here is this weeks Review!

Tig’d Up Tuesday submission – Jared Lewis aka WeldPipe

“Monel 400 butt weld ErNiCu-7 filler”

Continue reading →

Tig’d Up Tuesday is that day when our Fan Page goes crazy. We get messages right and left and we post tons of work people send in. There is no method to our madness on this day, no strategy, no timing structure, and no perfect weld to send. Some days we will only post the best work, and some days we will pick 1-3 photos which need critique, or in which a welder needs advice, and we will post them for the crowd. What we mean basically is we have no exact process for Tig’d Up Tuesday.

We also have a new “How-To” post for those of you looking for better weld prep techniques. This post has gained strong attention. 

http://betawpe.fabricationlife.com/2014/prep-is-everything

With that said, here are the photos we chose last week.

Matt Harm

“4” Schd. 40 304ss. Walking the cup (root pass)”

Continue reading →

Recent conversation has prompted the topic of “Prep is everything” around here at Fabrication Life.  This is a rule, a token of wisdom that should help anyone produce higher quality welds and finished products.  Seriously, why should the end product of fabrication get all of the attention in the process?  We hope this will open our readers minds to the importance of quality prep-work in the grand scheme of fabrication.  It is one of the most important moments in the process and one that it often times overlooked – leaving the work much to be desired. Continue reading →

Happy Holidays to all of our Fabrication Life fans! Always, receiving tons of Tig’d Up Tuesday submissions, we posted a few we felt to show off. Here, we will seperate by date posted. Enjoy the selection and tell us your favorites. We are partial to the flask! 

12/17/13

Ariel Banco

“5xxx series sheet. 3mm thickness. 100 amps, no pulse, 2.4mm 5356 filler rod. by Custom Plenum Creations”

Continue reading →

Indianapolis played host this past week to PRI. It was cold, too! Sub-teen temperatures were not the best conditions in the minds of thousands who traveled to Indy from all over the nation and world. The visitors who attended were there for business, and a lot went down! And new products were plenty! View more…. Continue reading →

Tig’d Up Tuesday on the Fabrication Life Facebook fan page was great this week in terms of submissions! You would think 10-15 submissions would have been posted but we were just a bit busy! Thank you again to everyone who posted. 

This week, we will show off a few of the submissions which did not get posted along with the posted material:

Niels Hattas

“TI-exhaust system for KTM/Nelson Welding” (Bike was built by Maarten Janssens)

Continue reading →

The PRI Show (now owned by SEMA) has moved back to it’s classic location of Indianapolis.

the cold weather, attendance is looking to be strong over the next 3 days. We are at the Vibrant Performance booth, and will have free stickers available the entire show. Please stop by, take a few, and tell us if you follow us! We also plan to do updates periodically about the show on Facebook, and have a daily report about PRI posted on FabricationLife.com

We walked through the venue last night and snapped a few photos of the booths as they were setting up.

Seeing this car on track is mind-blowing at times.

Real Time Racing

Blower Cars always get big attention, this one will draw a crowd!

This build is extremely interesting. Ford GT with a blow-thru setup, using VanJen Clamps, big screw supercharger, electronic city, and a completely redesigned cooling system. More to come on this car on FabricationLife.com.

Here you can see the prep work going into the display.

We will update more on the PRI Show. Check back to see what craziness we find, and who we happen to see. If you have something you are wanting to see tell us!

Last week was our 1st Tig’d Up Tuesday review on FabricationLife.com and the fans loved it!

This week we had a huge amount of traffic for Tig’ Up Tuesday. Here is what was posted: 

Myles Blackwell

“Mild Steel weld”

Continue reading →