We have seen his video all over the net, but what you didn’t see is the behind-the-scenes aftermath of Cody “LOVEFAB” Loveland’s fiery collision at Pikes Peak. Just put yourself in the drivers seat on this wild ride. It was a brief ride, but extremely dangerous with a vicious crash. This could have been deadly had it not been for top notch safety equipment. That, and proper chassis fabrication, is the only reason this was not a fatal ride that day in Cody’s used-to-be NSX, now coined Enviate.
Welcome back to part 2 of our Intercooler Series with Derek at SpeedFactory. We are now going to be mocking, measuring, and cutting the materials for the intercooler in this portion. We also will show you another piece or 2 in this article we made from scratch and detail why these components were needed.
PART 2 – FABRICATE AND BURN
Back in part 1, we explained to you why it is crucial to have all of your fabrication components before you start your job, while giving a few photos of what we were using. Our shopping cart tells you the exact materials we were using for the intercooler project and give you an idea of the outlets you will have to visit for these materials. Vibrant Performance is a similar outlet, where you can go for all of your fab materials you may need to complete such jobs.
End Tank Design
Without trying to point out the obvious I’ll start by saying intercooler cores are square and air moves most efficiently through rounds. My goal is to trick the airflow into thinking it is flowing through a round object by making that transition from square to round as smooth as possible.
It may sound easy, it may look easy, but keep in mind it has to fit within a chassis where the turbo and cooling systems are already developed and in place. A couple things on my mind while I am making this is having a solid structure,..i want to have as few welded seams as possible because the welded seam will always be the weakest link in a pressurized tank (also the reason I weld the tanks inside and out).
With that being said some fabricators who have mastered the english wheel, press brake, slip roll may look at my design thinking they could have done it in fewer pieces or made a smoother transition…this is where repeatability comes into play…if there were to an accident or unforeseen damage to the intercooler I have to be able to quickly repair or re produce this intercooler again.
Inner Velocity Stack
Speaking of airflow, I machined this square to round transition to further smooth the airflow and try to keep turbulence at a minimum and velocity at a maximum. This is at the intercooler outlet leading into the 3.5″ charge piping leading to the throttle body.
Stack finished and welded, ready to adorn the end tank and flow like a freight train!
The finished Product
As for the end result of the tank, it’s what I felt would fit, and perform best for our 1000+whp application.
We spy a Smurf!
Here is an inside joke with Cole. It’s Smurfette, because he calls the Vibrant Civic Si “Smurfy” obviously due to the blue colors used on the wrap. This little caricature was to be Smurfette holding down her skirt due to the wind inside of the end tank. This is a great play on the classic Marolyn Monroe scene from the 1955 film The Seven Year Itch, placing Monroe in a white dress which is now famed all over. Good go Derek!
This intercooler, while many pieces have been shortened and cut for your viewing, is ready to produce the 1000+whp that it will take to rail the Civic past those previous 8.4x time slips. Last year, we bested mid-8 second passes but now we will eclipse those times. A new day is on the horizon for the SFWD Civic you have seen.
If you haven’t heard, you probably aren’t in their league…the…
The Fabricationlife team witnessed this year’s crazy busy SEMA show…
On the first weekend of November 2015, the Vibrant team…
Race to the Ontario1500 With the upcoming event only weeks…
The FabricationLife media team got out to experience the recent FormulaD…
Behind the scenes of one of the busiest teams in…
Standing at the base of a Volcano in a mix…
How strong would you think LineX would add to the…
Kevin’s Twin Turbo SN95 car is one fast beast! Recently at DuckxPromotions Lights Out event at South Georgia Motorsports Park Kevin clocked a 4.113@194 on 315 Drag Radials. I will pause while you ponder on how fast that is. This car has a 4.0 in it all day, and it has a ton of power. Great job to Kevin, Crew, and DuckxPromotions!
From the build up of this car, as if one was not enough, stack 2 of those turbos.
We wish Kevin the best for this season. This car has been a while coming, and this 4.1 is just the tip of the iceberg!