FabricationLife
 
 

“3 Minute Fire”- Cody Loveland revisits Pikes Peak 2013 Crash with FabricationLife

Posted on

Cody Header 3

We have seen his video all over the net, but what you didn’t see is the behind-the-scenes aftermath of Cody “LOVEFAB” Loveland’s fiery collision at Pikes Peak.  Just put yourself in the drivers seat on this wild ride.  It was a brief ride, but extremely dangerous with a vicious crash. This could have been deadly had it not been for top notch safety equipment.  That, and proper chassis fabrication, is the only reason this was not a fatal ride that day in Cody’s used-to-be NSX, now coined Enviate.

Continue reading

Posted in DOMESTIC, FEATURED, IMPORT, PROJECTS | Tagged , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Chris Jeanneret’s Vibrant Performance FD s2000 first test runs!

Posted on

Screen Shot 2014-05-07 at 8.23.49 AM

A Honda in Formula Drift? Blasphemy says some, but this is something that has been anxiously anticipated by the masses, including us here at Vibrant Performance and Fabrication Life. Chris is not the 1st Honda to compete in FD, but there is a ton of fabrication and development that has been poured into this car. We cannot wait to see it on track this weekend at Formula Drift Round 2: ATL. Click here and watch Chris start to figure out the feel of the car…

Posted in BLOG, PROJECTS | Tagged , , , , , , , , , , , , , , , , , , , , , , ,

Jeanneret goes behind the scenes of the Vibrant Performance S2000

Posted on
Chris explains in this awesome video by Import Meet and RKFilms the thought and process behind his S2000, why he chose it, and his power goals. He also gives you a look behind the scenes inside SpeedFactory. Click here to see more! Continue reading

Posted in BLOG, IMPORT, PROJECTS | Tagged , , , , , , , , , , , , , , , , , , , , , , , , ,

Sedrick aka FastGuy builds SFWD Civic

Posted on

Let us start by saying we will call him FastGuy. So remember Sedrick=FastGuy. Aka Straight Outta Brooklyn. 

Screen Shot 2014-04-08 at 9.36.21 AM

 

Now that we have got that out of the way, let us introduce to you one of the most outspoken people we get to deal with. Blowing phones up at 2am, running around to get parts like a mad man looking to finish the car, and keeping the photos flowing, FastGuy Racing simply put is madness. To recap a little, Sed had a All Motor build that started up and went well. He hit the wall with that chassis.

Build #1 All Motor K breakout. Not that this car did a ton, but it was the start for Sed.

Screen Shot 2014-04-08 at 10.07.26 AM

 

One week later we had build #2. After that crash into the wall on Sunday, the following week this car was together and ready to run! This build went faster, more parts, more money, and then…. BOOM! Dropped a valve, it was a wrap on that build.

Screen Shot 2014-04-08 at 10.09.56 AM

 

Build #3. FastGuy Racing decides to step up from the All Motor class to Sport Front Wheel Drive.

Screen Shot 2014-04-08 at 10.02.54 AM Screen Shot 2014-04-08 at 9.36.52 AM Screen Shot 2014-04-08 at 9.37.18 AM Screen Shot 2014-04-08 at 9.37.47 AM

 

Known as SFWD, this class is strictly for bad asses these days. This class is made to still have the appearance of a street car. Hell, in some states, it could be! Key points include:

    • Limited to 72mm Turbochargers/2,400lb weight, 67mm Turbochargers/2,200lb weight
    • Air to Air intercoolers only
    • Max tire 25×9
    • Full Original Chassis
    • Full Glass
    • No Sumps
    • Electric fuel pumps only
    • No 1-piece front ends
    • Must have 1 headlamp
    • Stock style suspension only
    • Interior from front seats forward is required (passenger seat and rear seats are allowed to be removed)

It also is found explained by Aaron Bonk here on HondaTuningMagazine.com.

 

Here is the video build up of FastGuy’s new SFWD Civic

Here is another look into FastGuy’s build from a different prospective. These feature some language (NSFW), but you shouldn’t be watching while you are working anyways! Who does that?!!>?? :)

So for this build up to Honda Day, FastGuy has been on a complete tear to get this car finished up, on the Dyno, and ready for competition. Will the car race at Honda Day? We cannot say for sure yet  but the mad dash to finish up in time is definately going on. This guy have probably burnt hundreds of dollars this week alone trying to run around for last minute parts. We do not want the bill for that!

 

Here is a mod list for this SFWD coupe:

  • K20a2 long block
  • AP2 s2000 crank
  • InlinePro rods (Custom specs)
  • CP flat top pistons
  • Webb cams (Custom grind single lobe)
  • AEBS sleeves
  • Ferrera valve train
  • 4piston 153 ported head
  • Source Racing front end
  • Shaved engine bay (done by STS auto design)
  • Strange suspension
  • Nrgtech front subframe
  • DSS PRO level axles
  • SheepeyBuilt side winder manifold
  • Single 60mm Tial waste gate
  • Precision PTE 7285 SFWD legal T4 turbo
  • Garrett 12x24x4.5 intercooler core (Custom end tanks by Full Time Fab)
  • and more…

 

 image (1)

Screen Shot 2014-04-08 at 9.37.34 AM Screen Shot 2014-04-08 at 9.36.06 AM Screen Shot 2014-04-08 at 9.37.06 AM

 

 

We will keep you updated on FastGuy’s progress throughout the year and hopefully bring you video after video of mid 8-second passes over and over! Til next time….

Screen Shot 2014-04-08 at 9.32.03 AM

Ultimate Callout Challenge – Turbo Diesel Competition
Ultimate Callout Challenge – Turbo Diesel Competition
February 5, 2016

If you haven’t heard, you probably aren’t in their league…the…

2015 PRI Show – Highlights
2015 PRI Show – Highlights
December 23, 2015

The Fabricationlife team witnessed this year’s crazy busy SEMA show…

2015 World Cup Finals – Import vs. Domestic
2015 World Cup Finals – Import vs. Domestic
December 7, 2015

On the first weekend of November 2015, the Vibrant team…

Update: Aaron Weir’s RWD CRX Build
Update: Aaron Weir’s RWD CRX Build
September 1, 2015

Race to the Ontario1500 With the upcoming event only weeks…

FormulaD Orlando June 4-6 2015
FormulaD Orlando June 4-6 2015
June 16, 2015

The FabricationLife media team got out to experience the recent FormulaD…

SEMA 2014 – Vibrant Coverage
SEMA 2014 – Vibrant Coverage
November 11, 2014

Fall Nationals Prep: Chris Miller Racing/Prayoonto Racing Interview
Fall Nationals Prep: Chris Miller Racing/Prayoonto Racing Interview
September 24, 2014

Behind the scenes of one of the busiest teams in…

Man takes you inside Volcano with GoPro!
Man takes you inside Volcano with GoPro!
September 7, 2014

Standing at the base of a Volcano in a mix…

Super Strong Line-X Coating Put to Test
Super Strong Line-X Coating Put to Test
August 27, 2014

How strong would you think LineX would add to the…

Posted in BLOG, FEATURED, IMPORT, PROJECTS | Tagged , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Intercooler Series: Derek at SpeedFactory builds Dual Core Intcercooler Pt.2

Posted on

Welcome back to part 2 of our Intercooler Series with Derek at SpeedFactory.  We are now going to be mocking, measuring, and cutting the materials for the intercooler in this portion.  We also will show you another piece or 2 in this article we made from scratch and detail why these components were needed.

 

3cars_grande 

PART 2 – FABRICATE AND BURN

Back in part 1, we explained to you why it is crucial to have all of your fabrication components before you start your job, while giving a few photos of what we were using.  Our shopping cart tells you the exact materials we were using for the intercooler project and give you an idea of the outlets you will have to visit for these materials.  Vibrant Performance is a similar outlet, where you can go for all of your fab materials you may need to complete such jobs.

 IMG_6939

 

 

End Tank Design

Without trying to point out the obvious I’ll start by saying intercooler cores are square and air moves most efficiently through rounds.   My goal is to trick the airflow into thinking it is flowing through a round object by making that transition from square to round as smooth as possible.

IMG_6940IMG_6942

 

It may sound easy, it may look easy, but keep in mind it has to fit within a chassis where the turbo and cooling systems are already developed and in place.   A couple things on my mind while I am making this is having a solid structure,..i want to have as few welded seams as possible because the welded seam will always be the weakest link in a pressurized tank (also the reason I weld the tanks inside and out).  

 

IMG_6945IMG_6946

 

 

With that being said some fabricators who have mastered the english wheel, press brake, slip roll may look at my design thinking they could have done it in fewer pieces or made a smoother transition…this is where repeatability comes into play…if there were to an accident or unforeseen damage to the intercooler I have to be able to quickly repair or re produce this intercooler again.

 

Inner Velocity Stack

Speaking of airflow, I machined this square to round transition to further smooth the airflow and try to keep turbulence at a minimum and velocity at a maximum.   This is at the intercooler outlet leading into the 3.5″ charge piping leading to the throttle body.

IMG_6985IMG_6986IMG_6944IMG_6987IMG_6988IMG_6943

Stack finished and welded, ready to adorn the end tank and flow like a freight train! 

 

The finished Product

As for the end result of the tank, it’s what I felt would fit, and perform best for our 1000+whp application. 

IMG_6947IMG_6948

 

 

Inside Jokes

We spy a Smurf! 

IMG_6949

 

 

Here is an inside joke with Cole.  It’s Smurfette, because he calls the Vibrant Civic Si “Smurfy” obviously due to the blue colors used on the wrap.  This little caricature was to be Smurfette holding down her skirt due to the wind inside of the end tank.  This is a great play on the classic Marolyn Monroe scene from the 1955 film The Seven Year Itch, placing Monroe in a white dress which is now famed all over.  Good go Derek! 

 

IMG_6950

 

This intercooler, while many pieces have been shortened and cut for your viewing, is ready to produce the 1000+whp that it will take to rail the Civic past those previous 8.4x time slips.  Last year, we bested mid-8 second passes but now we will eclipse those times.  A new day is on the horizon for the SFWD Civic you have seen.

Ultimate Callout Challenge – Turbo Diesel Competition
Ultimate Callout Challenge – Turbo Diesel Competition
February 5, 2016

If you haven’t heard, you probably aren’t in their league…the…

2015 PRI Show – Highlights
2015 PRI Show – Highlights
December 23, 2015

The Fabricationlife team witnessed this year’s crazy busy SEMA show…

2015 World Cup Finals – Import vs. Domestic
2015 World Cup Finals – Import vs. Domestic
December 7, 2015

On the first weekend of November 2015, the Vibrant team…

Update: Aaron Weir’s RWD CRX Build
Update: Aaron Weir’s RWD CRX Build
September 1, 2015

Race to the Ontario1500 With the upcoming event only weeks…

FormulaD Orlando June 4-6 2015
FormulaD Orlando June 4-6 2015
June 16, 2015

The FabricationLife media team got out to experience the recent FormulaD…

SEMA 2014 – Vibrant Coverage
SEMA 2014 – Vibrant Coverage
November 11, 2014

Fall Nationals Prep: Chris Miller Racing/Prayoonto Racing Interview
Fall Nationals Prep: Chris Miller Racing/Prayoonto Racing Interview
September 24, 2014

Behind the scenes of one of the busiest teams in…

Man takes you inside Volcano with GoPro!
Man takes you inside Volcano with GoPro!
September 7, 2014

Standing at the base of a Volcano in a mix…

Super Strong Line-X Coating Put to Test
Super Strong Line-X Coating Put to Test
August 27, 2014

How strong would you think LineX would add to the…

Posted in BLOG, FEATURED, HOW TO | Tagged , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Vibrant Performance joins Chris Jeanneret Racing as title sponsor for Formula Drift 2014!

Posted on

CJ-SF-Vibrant-Release-Final_9d47ddf4-a205-45df-a57b-f854e1132530

VIBRANT PERFORMANCE IS THE NEW TITLE SPONSOR FOR Chris Jeanneret Racing

 

Tacoma, WA – Vibrant Performance is happy to announce it’s continued partnership with SpeedFactory Racing by announcing their title sponsorship of Chris Jeanneret’s Formula DRIFT Honda S2000. Vibrant Performance has been the fabrication component of choice for the industry and their commitment to SpeedFactory Racing shows their devotion to the racing community. Continue reading

Posted in BLOG, FEATURED, IMPORT, PROJECTS, SHOP TALK | Tagged , , , , , , , , , , , , , , , , , , , , ,

Ryan Tuerck blasts through Oregon Trail.

Posted on
Ryan Tuerck blasts through this super curvy dream road on this episode from Network A’s “Tuerck’d”. Click here to watch. Continue reading

Posted in BLOG, IMPORT | Tagged , , , , , , , , , , , , , , , , , , , , , ,

Intercooler Series: Derek at SpeedFactory builds Dual Core Intcercooler Pt.1

Posted on
Ok, we bring you a large amount of extremely high quality fabrication photos and topics on our Facebook Fan page.  We have also been bringing you top notch articles and topics on Fabircationlife.com, including; Quickies: Intro to Tungsten & PrepSolidWorks TipsPrep Is EverythingFabricators Series: Collectors 101, and all of our Tig’d Up Tuesday reviews.  Now we want to show you a more detailed fab session with a seasoned vet, Derek Chorum.

 

3cars_grande

Continue reading

Posted in BLOG, FEATURED, HOW TO | Tagged , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,